Filamento Flessibile Spectrum S-Flex 90A
Filamento Flessibile Spectrum S-Flex 90A
Where durability and flexibility is essential
Spectrum S-Flex 90A is a filament designed for 3D printing, which enables you to manufacture flexible items in a much simpler way than with other materials of this type. The appropriate composition of the material provides for good adhesion both between layers and between the printed item and the build platform.
Due to the resistance to hydrocarbons and good lamination between layers, you may manufacture sealing items which need to be resistant to any operating fluid and to ensure the best tightness possible.
Up to 500% elongation at breakS-Flex 90A
Density | 1.22 g/cm3 |
Nozzle temperature | 200-230°C |
Bed temperature | 50-70°C |
Printing speed | 15-50 mm/s |
Verify your spool - track diameter | YES |
S-Flex 90A advantage
- very good wear and tear resistance
- up to 500% elongation at break
- Shore-A hardness of 90
- low shrinkage
- resistance to many common industrial oils and chemicals
- reduced stringing while the printer is running idle
- printing without any major reduction of the printing speed or the filament winding around the extruder drive gear
- shape and material properties stability in the temperature range -30 to + 60°C
Applications:
- manufacturing of seals with a high chemical resistance
- production of items, which has to be used as energy adsorbents
- functional parts
- all kinds of bumpers, vibration dampers
- guides
- protective cases
- snap-fit cases
- sleeves
- hinges
In addition to the abovementioned properties, S-Flex 90A material is also characterized by good resistance to UV radiation and high resistance to aging. Flexible filament S-Flex 90A shows resistance to weak and diluted acids and bases.
Ancora nessuna recensione da parte degli utenti.
22 altri prodotti della stessa categoria:
